Paint Brush
paint brush kits
brush set
floor brush
wool paint brush
Round Paint Brush
Roller Cover
wool paint brush
ceiling brush / wall brush
paint roller frame
Paint roller brush
Paint Roller Trays
Extension rod
Sponge brush
Artist Brush
Wire Brush
Bristles
Paint Scraper
Masking tape
Polishing Tools
Glue Gun
1. Bristle:
height (±2mm)
must be filled in evenly along width
must set firmly in its metal cartridge (to check this one must pull bristle out with an adequate
force used to apply when painting)
must have straight edge
material (artificial, natural, mixed)
2. Metallic cartridge:
must not have rusty traces
must be fixed with 2 rivets / cramps on each side
must fit tightly to the handle, without gaps between them
3. Sticker
Appearance of a sticker must coincide with that of Specification
4. Handle
dimensions in accordance with Technical Data Sheet (Specification)
symmetrical form of a front view flat in side view hole of defined diameter and precise
position on the handle surface
perfectly printed logo, without blurs
smooth and polished surface without burrs
5. Sleeve
length and outer diameter (±2mm)
exact inner diameter 8 mm
textile fiber height and density must be constant through the sleeve length
material (polyamide) is smooth to the touch
6. Sleeve handle
must not have rusty traces
metal rod must be smoothly polished
metal and plastic part must fit tightly without gaps between them
hole of defined diameter and precise position on the handle surface
During Production Inspection
The During Production Inspection (DPI) will take place during production between 20% and maximum 50% of the manufacturing process. We check packed and ready to go products.
What do we check during a During Production Inspection?
Product appearance (AQL), workmanship quality, size measurements, weight check, functionality assortment, accessories, labeling & logos, packaging, packing and other tests and special requirements, depending on the product and the export market. The During Production Inspection (DPI) will also cover the raw materials, unfinished products and the planning of production.
The added value of a During Production Inspection?
We will intervene in the middle of the production process, we check if the quality of your products reaches your standards and we make a statement of your production schedule. We inspect the actual production volume to avoid any delays in your final shipment. At this stage, you can still modify the production protocol and still be on time with your order in case of problems.
Highlights of this quality control inspection service
1> Assure that the mass production quality is the same as the golden sample
– Implement the necessary corrective actions before having too many defects
– Be aware of the percentage of defects of finished products
2> The exact statement of the production planning
– Avoid unnecessary costs and delays
Why should I book this During Production Inspection?
Because you might want to check if the production is running smoothly, especially if no final random inspection were performed during the first processes of the production. Because you should keep pressure on your vendor’s shoulders and because trust is good, but control is better.
